高功率980nm垂直腔面发射激光器的亮度特性

在循环水冷却(工作环境温度控制在15℃)和连续注入电流条件下,从垂直腔面发射激光器(VCSEL)亮度基本定义出发,实验测量了不同注入电流时口径为400μm的高功率980nm InGaAs/GaAs应变量子阱垂直腔面发射激光器(VCSEL)的亮度特性。结果表明:在注入电流4 A时,随着注入电流的增加,亮度也跟着增加;当注入电流4A时,尽管输出功率在增加,但是器件的光束质量变差,M2因子升高,表明此时影响器件亮度的主导因素是M2因子,所以亮度减小;在注入电流为4A,输出功率为1.2W时,亮度达到最大值2.43kW/cm2.sr,此时的光束质量最好,M2因子为207。最后,分析了影响高功率VCSEL器件亮度特性的主要因素,提出了提高器件亮度特性的解决方法。     

聚变堆相关的液态金属膜流初步实验研究

在磁约束核聚变堆的面对等离子部件设计中,液态金属锂膜流因具有带走杂质、保护面对等离子固壁等优点而被认为是优选方案之一. 然而,如何克服聚变堆中强磁场环境下产生的磁流体力学效应并形成大面积均匀铺展锂膜流动是目前亟需解决的问题.本文通过搭建室温液 态镓铟锡回路和高温液态锂回路,开展了两种不同特性的液态金属膜流实验, 并采用传统可视化方法获得了展向磁场存在时镓铟锡和锂在导电底板形成的液膜流动表面特征.实验结果 表明: 无磁场时,两种液态金属膜流流动表面波动特性与常规流体膜流均一致, 即随着流动雷诺数的增加表面波动变得更为混乱; 而展向磁场存在时,镓铟锡膜流表面波动变得更为规则, 且沿着磁场方向平行排列,表现为拟二维波动的特征; 而锂膜流却产生了明显的磁流体 力学阻力效应,表现为在流动方向局部产生锂滞留现象, 且滞留点随雷诺数增大向下游移动. 最后通过膜流受力分析,进一步阐述了锂膜流受到比镓铟锡膜流更为严重磁流体力学效应影响的原因.      

激光诱导Ti等离子体电子温度的实验研究

室温,常压下,利用Nd∶YAG脉冲激光器产生的波长为1 064 nm, 脉宽12 ns,能量分别180, 230和280 mJ的脉冲激光冲击Ti靶,使用中阶梯光栅光谱仪检测了三种激光能量下对应的光谱。调节延时器DG645的延迟时间,检测了延迟0～500 ns时间范围内Ti等离子体对应激光能量下的发射光谱,分析光谱,可以得到了九条不同的的TiⅠ 和TiⅡ等离子体谱线,证明在该实验条件下,Ti靶能够充分吸收能量电离且离子谱线具有不同的演化速率,利用Saha-Boltzmann法计算并分析Ti等离子体电子温度,实验结果表明：相同的延迟时间,激光能量越大,谱线相对强度越大,电子温度越高,谱线相对强度的变化量随激光能量的变化量增大而增大;在延时0～150 ns内,三种激光能量下的等离子体电子温度和谱线的相对强度都随延迟时间的增加而快速下降,其中280 mJ激光能量下的等离子体电子温度和谱线强度下降速率较快;在150～250 ns范围内,电子温度和谱线强度均随延迟时间的增加有一个缓慢的上升,180 mJ激光能量下的等离子体电子温度和谱线强度的上升速率较快。250～500 ns范围内,三种激光能量下的电子温度和谱线强度均随延迟时间的增加而缓慢下降。     

基于视频推荐技术的无线网络视频服务器设计

无线网络视频服务器中视频推荐技术已成为重要技术之一,视频推荐技术是为了用户在使用无线网络是视频务器时,更快的找到感兴趣的视频。采用当前方法对用户进行视频推荐时,未考虑用户的兴趣偏好是否随着时间有所变化,使视频推荐出现偏差。为此,提出一种基于视频推荐技术的无线网络视频服务器设计方法。该方法首先使用无线网络视频服务器硬件部分的MPEG-4进行视频数据采集,并对MPEG-4采集的视频数据进行整理。在由软件部分把采集到的视频数据储存到缓冲区,进行视频缓冲,并建立视频数据队列进行视频数据输送。以计算无线网络视频的相似度来搜索相近视频,将搜索到的视频与目标用户观看过的视频进行对比,对比相似度越接近1,则说明用户对推荐视频感兴趣的几率大,反之越接近-1用户对推荐视频越不感兴趣。此计算方法能有效的从海量视频数据中快速的搜索出目标用户感兴趣视频。实验结果表明,将视频推荐技术应用到无线网络视频中可以迅速准确的搜索出目标用户感兴趣视频。     

Invariant Tori of Full Dimension for Second KdV Equations with the External Parameters

In this paper, we consider the second KdV equation with the external parameters

$$\begin{aligned} u_{t} =\partial _x^5 u +(M_{\sigma }u+u^3)_{x}, \end{aligned}$$

under zero mean-value periodic boundary conditions

$$\begin{aligned} u(t,x+2\pi )=u(t,x),\quad \int _0^{2\pi }u(t,x)dx=0, \end{aligned}$$

where \(M_\sigma \) is a real Fourier multiplier. It is proved that the equations admit a Whitney smooth family of small amplitude, real analytic almost periodic solutions with all frequencies. The proof is based on a conserved quantity \(\int _0^{2\pi } u^2 dx\), Töplitz–Lipschitz property of the perturbation and an abstract infinite dimensional KAM theorem. By taking advantage of the conserved quantity \(\int _0^{2\pi } u^2 dx\) and Töplitz–Lipschitz property of the perturbation, our normal form part is independent of angle variables in spite of the unbounded perturbation. This is the first attempt to prove the almost periodic solutions for the unbounded perturbation case.

     

A KAM Theorem for Higher Dimensional Forced Nonlinear Schrödinger Equations

In this paper, we prove an infinite dimensional KAM theorem. As an application, it is shown that there are many real-analytic small-amplitude linearly-stable quasi-periodic solutions for higher dimensional nonlinear Schrödinger equations with outer force

$$\begin{aligned} iu_t-\triangle u +M_\xi u+f(\bar{\omega }t)|u|^2u=0, \quad t\in {{\mathbb R}}, x\in {{\mathbb T}}^d \end{aligned}$$

where \(M_\xi \) is a real Fourier multiplier,\(f({\bar{\theta }})({\bar{\theta }}={\bar{\omega }} t)\) is real analytic and the forced frequencies \(\bar{\omega }\) are fixed Diophantine vectors.

     

高效液相色谱法测定海洋水体与沉积物中光合色素

建立了海洋水体与沉积物中30种光合色素的反相高效液相色谱检测方法。海水滤膜和沉积物分别采用95%甲醇和95%丙酮超声萃取。萃取液混合一定比例的超纯水后,采用Eclipse XDB C8反相柱进行分离,以乙腈(A)、甲醇(B)和四丁基羟胺-甲醇(C)混合液为流动相进行洗脱,检测波长为430,440和450nm,柱温为50℃。色谱分离梯度为:0min,100%C;22min,25%A,45%B和30%C;28～38min,70%A,20%B和10%C;38.1～40min,100%C。对23种已知浓度色素的线性关系、检出限和加标回收率进行分析。结果表明,相关系数范围为0.9972～0.9998,检出限范围为0.0305～0.7740ng,加标回收率范围为88.6%～103.3%。     

Synthesis of MCM-22 zeolite using rice husk as a silica source under varying-temperature conditions

In this study, rice husk, an abundant agricultural byproduct, was utilized as an alternative silica source for the synthesis of MCM-22. The zeolite with high crystalline was synthesized using a three-stage varying-temperature hydrothermal method. The prepared silica and MCM-22 were characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The results showed that the duration required for zeolite crystallization was significantly decreased under varying-temperature conditions. The MCM-22 was in the form of thin platelet-like crystals, and no amorphous material existed in the framework of the MCM-22 after calcination and ammonium exchange. Cationic brilliant red 5GN, a basic dye used in the wool and blanket factories for fiber dyeing, was selected as the adsorptive to study the adsorption performance of the MCM-22. Adsorption experiments indicated that the maximum extent of adsorption was obtained at pH of 10, contact time of 60 min, and MCM-22 dose of 1.0 g/L. The adsorption kinetic has been described by first-order and pseudo-second-order models. It was observed that the rate of dye adsorption followed pseudo-second-order model.     

遥爪型液体天然橡胶的合成与表征

以天然橡胶(NR)为原料,经环氧化反应在NR分子链上引入环氧基制得环氧化天然橡胶(1);1经裂解反应合成了端羰基液体天然橡胶(2);对2进行改性得到端羟基液体天然橡胶(3),其结构经1H NMR和IR表征。探讨了反应温度、时间、氧化剂用量和环氧化程度对2的黏均分子量(M珚η)的影响。结果表明,延长反应时间、升高温度和增加氧化剂用量均可有效降低2的M珚η;1的环氧化程度对2的M珚η具有决定性作用,可通过调节环氧化程度实现2的M珚η的可控性。     

Piecewise linear prewavelets over type-2 triangulations

In this article, we study the construction of piecewise linear prewavelets over type-2 triangulations. Different from a so-called semi-prewavelet approach, we investigate the orthogonal conditions directly and obtain parameterized prewavelets with a smaller support. The conditions for parameterized prewavelet basis on the parameters are also given.